Ene parkrat na leto,moj WsWin odpove poslušnost z napisom"Error - unable to create log file". Z resetiranjem računala se sicer to popravi,ampak me vseeno zanima,kaj bi lahko bilo temu vzrok,če kdo slučajno ve.
iz Help fajla ..nisem prevajal
File ---> Options :
Log interface data transfer ...
If this option is chosen, all activities are recorded on the chosen COM-interface and saved in the file "WSWIN.TRC". This file is not written on the main disk, however, before the termination of the WSWIN-programs and the data are added always to an available file!
The chosen buffer size (in wswin.cfg -> TraceSize) determines how many data per start of program are supposed to be recorded. The version 32-bit has a maximal adjustable size of 400 000 and the 16-bit version 32760 -> with the 16-bit application it is not possible to log a complete wireless interface buffer with 1024 and/or 512 data records.
This option should be turned on only to trace errors of the communication with the wireless interface and/or if somebody likes to evaluate this file in another way in addition.
Log error (communication, data correction)
In case of choice of these options errors of the serial interface communication (checksum errors ) are saved in the file "wswinerr.txt".
In the same way the measured values corrected by the plausibility check are recorded in this file.
Sample: 12.03.2000 21:23:16 10.03.2000 10:15 Z3548 B728 T0 eingel. Wert 0.0 PlausWert 20.5 PAnz. 1
(Report time spot; Measured value date/time; Time value; Block value; Measured value; read in value; adjustment value; correction number)
There is an additional parameter to it in the WSWIN.CFG:
[Options]
ErrorLog=1
ErrorLogHead=0
If one puts this value on 1 (ErrorLogHead=1) and error logging is switched on (ErrorLog=1), the start and stop-data of the wireless interface communication become additional to the errors each Wswin- program start recorded!
Debug
Becomes additional “debug"-files with it - sees File as well as additional info in the status bar. With the
options 1..8 (9 ..16 = reserve), one can activate DEBUG-Modi additionally. The to activating function is shown if one points to the activation field with the mouse.
It should be activated only to the debugging.